Telescope Carrying Case for Celestron 9¼", 11", 14" OTA

Celestron C9¼-S, C9¼-SGT, CG-9¼, C11-SGT, CG-11, CG-14, CGE 925, CGE 1100, CGE 1400, CM-1100, CM-1400

This case is for the Optical Tube Assembly (OTA) ONLY.  The case includes two lockable latches, three steel-reinforced handles, a 3" by 30" steel hinge and die-cut foam lining for the telescope optical tube.  It can be carried by two people using the two handles on either end or pulled using the attached wheels.  The foam is configured at the factory for the 9¼" optical tube.  You simply pull out precut sections to increase the cavity size to match the 11" or 14" optical tube.  The finder scope and diagonal must be detached and carried separately (14") or wrapped for protection and inserted in the extra space in the case (11").  An adapter bracket is included (see below) for instant accurate repositioning when attaching the finder scope.  The wheels must be attached to the case by the customer which is easily accomplished in a few seconds with no tools required.  An optional Large-Wheel Upgrade is available (at the time of purchase only).

Outside dimensions of the case are approximately 36 x 21-1/4" x 19" and its empty weight is approximately 27.8 lbs.  The shipping box is approximately 26-1/4" x 19" x 38-1/2" (FedEx Ground dimensional weight is at 100 lbs) and the shipping weight is approximately 34.8 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

	Carrying Case Open
	This three-point automatic-repositioning quick-release finder bracket allows the finder scope (shown here) to be removed and placed in the carrying case without loosing positioning.  Simply reinstall the finder with a single thumbscrew and you are ready to go.

Telescope Carrying Case for Celestron CPC 800 GPS

Celestron CPC 800 GPS, NexStar 8 GPS (Dual Fork Arm)

The case includes four lockable latches for the removable cover (no hinge), two steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces and accessories.  It can be carried (requires two people) or pulled using the attached 4" wheels.  Both the finder scope and hand unit must be detached and inserted into protective pouches (included) and placed inside the case.

Outside dimensions of the case are approximately 31-3/4" x 17-1/4" x 23-1/4" and its empty weight is approximately 18.2 lbs.  The shipping box is approximately 23-1/4" x 17-3/4" x 32" (FedEx Ground dimensional weight is 69 lbs) and the shipping weight is approximately 23.6 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	An adapter bracket (below) is available for the NexStar 8 GPS.  It gives instant accurate repositioning when attaching the finder scope.
	Carrying Case Open
	This three-point automatic-repositioning quick-release finder bracket allows the NexStar finder scope (shown here) to be removed and placed in the carrying case without loosing positioning.  Simply reinstall the finder with a single thumbscrew and you are ready to go.

Telescope Carrying Case for Celestron CPC 1100 GPS

Celestron CPC 925 GPS, CPC 1100 GPS, NexStar 9¼ GPS, NexStar 11 GPS

The case includes four lockable latches for the removable cover (no hinge), three steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces and accessories.  It can be carried (requires two people) or pulled using the attached 10" pneumatic wheels.  Both the finder scope and hand unit must be detached and inserted into protective pouches (included) and placed inside the case.

Outside dimensions of the case are approximately 42" x 25" x 26-3/4" (with wheels installed) and its empty weight is approximately 36.0 lbs.  The shipping box is approximately 26-1/4" x 19" x 38-1/2" (FedEx Ground dimensional weight is 100 lbs) and the shipping weight is approximately 43.2 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	An adapter bracket (below) is available for the NexStar 9¼ and NexStar 11 GPS.  It gives instant accurate repositioning when attaching the finder scope.
	Carrying Case Open with CPC 1100 GPS Inside
	Carrying Case Open and Empty
	This image shows the carrying case being pulled by the lower handle which is placed specifically for pulling the case.
	This three-point automatic-repositioning quick-release finder bracket allows the NexStar finder scope (shown here) to be removed and placed in the carrying case without loosing positioning.  Simply reinstall the finder with a single thumbscrew and you are ready to go.

Telescope Carrying Case for Celestron NexStar 6 SE

Celestron NexStar 4 SE / 5 SE / 6 SE

The case does NOT include any foam.  You must use the ORIGINAL PACKAGING foam in this case.  The case includes one steel-reinforced handle, two lockable latches and a 2" by 20" steel hinge.

Outside dimensions of the case are approximately 22-3/4" x 16" x 11" and its empty weight is approximately 9.4 lbs.  The shipping box is approximately 23-5/8" x 11-1/2" x 18-3/8" and the shipping weight is approximately 12.7 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Carrying Case Open with NexStar 6 SE Inside

Telescope Carrying Case for Celestron NexStar 8 (Single Fork Arm)

Single Fork Arm versions of the NexStar 8
Celestron NexStar 8 / 8i / 8 SE / 8i SE (Special Edition)
(may include optional GPS accessory)

The case includes four lockable latches, three steel-reinforced handles, a 3" by 26" steel hinge and die-cut foam lining with compartments for telescope, eyepieces and accessories (including mounting bolts).  It can be carried or pulled using the attached wheels.  An optional Large-Wheel Upgrade is available.  The star pointer must be removed from the telescope and inserted into a foam compartment.  The telescope hand unit can be removed for protection, if desired, and placed in a foam compartment.

Outside dimensions of the case are approximately 31-3/4" x 21-5/8" x 13-3/4" and its empty weight is  approximately 21.2 lbs.  The shipping box is approximately 32" x 14" x 22-1/2" (FedEx Ground dimensional weight is 54 lb) and the shipping weight is approximately 25.8 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Carrying Case Open with NexStar 8 Inside

Telescope Carrying Case for JMI RB-66 Reverse Binocular

JMI 6" RB-66 Reverse Binocular

The case includes four lockable latches for the removable cover (no hinge), four steel-reinforced handles and foam lining.  It can be carried or pulled using the attached wheels.  The finder scope must be detached and inserted into the case.  A Retractable Handle Upgrade is available (at the time of purchase only).  An optional Large-Wheel Upgrade option is also available.

Outside dimensions of the case are approximately 35-1/2" x 28-1/2" x 13" and its empty weight is approximately 26.0 lbs.  The shipping box is approximately 36-1/2" x 14-3/4" x 29-1/4" (FedEx Ground dimensional weight is 83 lbs) and the shipping weight is approximately 31.6 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

	Carrying Case Open
	The carrying case for the RB-66, like most JMI cases, includes wheels for easy transport and three handles on the sides for picking up or pulling the case.  The wheels can be seen at the bottom left side of the case in this picture.

Telescope Carrying Case for Meade LX200GPS 7"

Meade LX200 7" Mak-Cass, LX200GPS 7" Mak-Cass

The case includes four lockable latches for the removable cover (no hinge), three steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces and accessories.  It can be carried (requires two people) or pulled using the attached 10" wheels.  The finder scope must be detached and inserted into the vinyl protective pouch (included) and placed inside the case.

Outside dimensions of the case are approximately 42" x 25" x 26-3/4" (with wheels installed) and its empty weight is approximately 37.0 lbs.  The shipping box is approximately 26-1/4" x 19" x 38-1/2" (FedEx Ground dimensional weight is 100 lbs) and the shipping weight is approximately 44.2 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Carrying Case Open

Telescope Carrying Case for Meade LX 8"

Meade LX50 8", LX90 8", LX90GPS 8", LX100 8", LX200 8" (non-GPS), LX200GPS 8", LX200R 8"

The case includes four lockable latches, three steel-reinforced handles, a 3" by 26" steel hinge and die-cut foam lining with compartments for telescope, eyepieces, finder scope and accessories.  The finder scope must be removed from the telescope and placed in a foam compartment.  The case can be carried or pulled using the attached wheels.  An optional Large-Wheel Upgrade is available.

When used for the Meade LX90, the LNT Module and SmartFinder must be removed and stored in the case.  An adapter bracket is included (see below) for instant accurate repositioning when attaching the LNT Module.

Outside dimensions of the case are approximately 31-1/2" x 21-1/2" x 13-1/2" and its empty weight is approximately 21.0 lbs.  The shipping box is approximately 32" x 14" x 22-1/2" (FedEx Ground dimensional weight is 54 lb) and the shipping weight is approximately 25.8 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	The foam for this case is manufactured with pre-cut removable strips to convert the cavity configuration from the LX90 shape to the LX50/100/200 shape. Our carrying cases are manufactured with exact-fit die-cut foam to hold the telescope as securely as possible.  They can, however, be used for telescopes other than those for which they were designed.  The following information is provided to help you make a decision about purchasing a case for telescopes not listed above: The following fork-mounted telescopes should fit inside the CASELX8 with a small amount of space between the fork arms and the foam.  A small cut may be needed for the fork arms and/or control panel. Celestron C8 / C8+ / Celestar 8 Deluxe / Powerstar 8 / Fastar 8 (both Original Version with non-tapered Celestar 8 style fork arms and Newer Version with tapered Ultima 9-1/4" style fork arms), Meade 2080 / 8" LX2 through LX10 / Ultima 8 The optical tube of Celestron and Meade 8" German Equatorial SCT or Newtonian telescopes (26" length maximum) will fit inside the CASELX8 loosely with extra padding needed to take up extra space, especially at one or both ends of the optical tube.
	Carrying Case Open with LX90 Inside
	This three-point automatic-repositioning quick-release bracket allows the Meade LX90 LNT Module with SmartFinder to be removed and placed in the carrying case without loosing positioning.  Simply reinstall the finder with a single thumbscrew and you are ready to go.

Telescope Carrying Case for Meade LX 10"

Meade LX50 10", LX90 10", LX90GPS 10", LX100 10", LX200 10" (non-GPS), LX200GPS 10", LX200R 10"

The case includes four lockable latches, three steel-reinforced handles, a 3" by 30" steel hinge and die-cut foam lining with compartments for telescope, eyepieces, finder scope and accessories.  The finder scope must be removed from the telescope and placed in a special vinyl cover included with the case.  The Meade Microfocuser on the GPS scope must also be removed and placed in a foam compartment in the case.  Three thumbscrews are provided to replace the focuser's original mounting setscrews, for easy removal and reinstallation.  The case can be carried or pulled using the attached wheels.  Optional upgrades include the Large-Wheel Upgrade and Retractable Handle Upgrade (best if installed at time of purchase).

When used for the Meade LX90, the LNT Module and SmartFinder must be removed and stored in the case.  An adapter bracket is included (see below) for instant accurate repositioning when attaching the LNT Module.

Outside dimensions of the case are approximately 36-3/4" x 24-5/8" x 16-1/2" and its empty weight is approximately 26.2 lbs.  The shipping box is approximately 26-1/4" x 19" x 38-3/4" (FedEx Ground dimensional weight is 100 lbs) and the shipping weight is approximately 34.1 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	Our carrying cases are manufactured with die-cut foam to hold the telescope as securely as possible.  They can, however, be used for telescopes other than those for which they were designed.  The following information is provided to help you make a decision about purchasing a case for telescopes not listed above: The following fork-mounted telescopes should fit inside the CASELX10 with a small amount of space between the fork arms and the foam. Most 10" Fork-Mounted SCTs including Meade 2120, 10" LX2 through LX10 and Ultima 9-1/4" The optical tube of Celestron and Meade 10" German Equatorial SCTs will fit inside the CASELX10 loosely with extra padding needed to take up extra space, especially at one or both ends of the optical tube.
	Carrying Case Open with some accessories Inside
	This three-point automatic-repositioning quick-release bracket allows the Meade LX90 LNT Module with SmartFinder to be removed and placed in the carrying case without loosing positioning.  Simply reinstall the finder with a single thumbscrew and you are ready to go.

Telescope Carrying Case for Meade LX 12", RCX 10"

Meade LX90GPS 12", LX200 (non-GPS) 12", LX200GPS 12", LX200R 12", LX400-
ACF 10", RCX400 10"

The case includes six lockable latches for the removable cover (no hinge), two folding handle bars, four steel-reinforced handles and die-cut foam lining with compartments for telescope, eyepieces, finder scope (must be removed from the telescope and placed in a special vinyl cover included with the case) and accessories.  The focuser does not need to be removed before installation.  The top of the case is not hinged.  It is removed completely to insert or remove the telescope.  The case is designed to be maneuvered like a wheelbarrow with the two retractable handle bars and two 10" pneumatic wheels.  Installation of the wheels and support rails is easy and requires two 7/16" wrenches (or two crescent wrenches).  This case is compatible with Peterson ergonomic Get-A-Grip handles.

Outside dimensions of the case are approximately 51-5/8" x 24-7/8" x 19" (with wheels installed and handle bars retracted) and its empty weight is approximately 44.0 lbs.  The shipping box is approximately 43-1/2" x 14-3/4" x 25-3/4" (FedEx Ground dimensional weight is 89 lbs) and the shipping weight is approximately 53.0 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

	Carrying Case Open with RCX400 10" Inside
	This image shows the size of our original carrying case for the Meade LX200GPS 12" telescope compared to the size of Meade's original shipping box.

Telescope Carrying Case for Meade LX 14", RCX 12"

Meade LX200GPS 14", LX200R 14", LX400-ACF 12", RCX400 12"

The case includes six lockable latches for the removable cover (no hinge), two folding handle bars and a steel-reinforced handle.  It also has die-cut foam lining with compartments for telescope, eyepieces, finder scope and accessories.  The finder scope must be removed from the telescope.  Protective covers are provided for the finder and hand control.  The focuser does not need to be removed before installation.  The top of the case is not hinged.  It is removed completely to insert or remove the telescope.  The case is designed to be maneuvered like a wheelbarrow with the two retractable handle bars and two 10" pneumatic wheels.  Installation of the wheels and support rails is easy and requires two 7/16" wrenches (or two crescent wrenches) and an included 15/16" wrench.  This case is compatible with Peterson ergonomic Get-A-Grip handles.

Outside dimensions of the case are approximately 51-1/4" x 28-1/4" x 23-3/4" (with wheels installed and handle bars retracted) and its empty weight is approximately 52.0 lbs (including accessory covers).  The top half weighs approximately 14.4 lbs. and the bottom half weighs approximately 37.0 lbs (assembled).  The two shipping boxes are approximately 49-1/4" x 11" x 28" each (FedEx Ground dimensional weight is 78 lbs for each box) and the shipping weight is approximately 34.0 lbs for the top (including unassembled wheels and hardware) and 31.4 lbs. for the bottom for a total of 65.4 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Carrying Case Open with RCX400 12" Inside

Telescope Carrying Case for Meade RCX400 Tripod

Meade LX400-ACF 10" / 12" / 14" Tripod, RCX400 10" / 12" / 14" Tripod

The case includes four lockable latches, three steel-reinforced handles, a 3" by 30" steel hinge and compartments for the legs and center post.  Two plastic straps with thumbscrews are provided for holding the lets in their compartments.  The case can be carried or pulled using the two attached 10" pneumatic wheels.  Installation of the wheels is easy and requires two 7/16" wrenches (or two crescent wrenches).

Outside dimensions of the case are approximately 46-3/4" x 24-1/2" x 15-1/2" (with wheels installed) and its empty weight is approximately 33.4 lbs.  The shipping box is approximately 26-1/4" x 19" x 38-1/2" (FedEx Ground dimensional weight is 100 lbs) and the shipping weight is approximately 41.4 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Carrying Case Open with RCX400 Tripod Inside

Telescope Carrying Case for Meade LXD75 SN-8 / SN-10

Meade LXD55 SN-8 / SN-10, LXD75 SN-8 / SN-10

The Optical Tube Assembly (OTA) case includes two lockable latches, two steel-reinforced handles, a 3" by 34" steel hinge and die-cut foam lining with compartments for telescope, eyepieces, finder (must be detached and inserted into a foam compartment) and accessories.  It can be carried or pulled using the attached wheels.  The foam is configured at the factory for the SN-8. You simply pull out precut sections to increase the cavity size to match the SN-10.  An optional Large-Wheel Upgrade is available.

Outside dimensions of the OTA case are approximately 40-1/2" x 17-1/2" x 15-1/4" and its empty weight is approximately 21.2 lbs.  The shipping box is approximately 40-5/8" x 15-5/8" x 18-1/2" (FedEx Ground dimensional weight is 65 lb) and the shipping weight is approximately 26.0 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	Our carrying cases are manufactured with exact-fit die-cut foam to hold the telescope as securely as possible.  They can, however, be used for telescopes other than those for which they were designed.  The following information is provided to help you make a decision about purchasing a case for telescopes not listed above: The optical tube of the Telescope Engineering Co. (TEC) f/12 Maksutov-Cassegrain ( MC250/12) telescope will fit inside the CASE55OTA after some modification of the foam (based on comments and a photo from one of our customers).
	Carrying Case Closed
	Carrying Case Open
	The carrying case will accommodate either the 8" or the 10" Schmidt Newtonian.  This picture shows the SN-10 inside.  The extra foam designed for the 8" scope has been removed to make room for the 10".

Carrying Case for Meade LXD75 Equatorial Head

Meade LXD55 Mount (LXD55-Series AR-5 / AR-6 / SC-8 / SN-6 / SN-8 / SN-10), LXD75 Mount (LXD75-Series AR-5 / AR-6 / SC-8 / SN-6 / SN-8 / SN-10)

The Equatorial Head case includes brackets for securing the complete head assembly and declination shaft.  A pouch for the Autostar hand control is included.

Outside dimensions of the Equatorial Head case are approximately 26-3/8" x 16-5/8" x 7-1/8" and its empty weight is approximately 9.5 lbs.  The shipping box is approximately 29" x 17-1/4" x 9-1/2" and the shipping weight is approximately 12.7 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Telescope Carrying Case for 8" SCT OTA

Celestron C8-S, C8-SGT, CGE 800, G-8, Great Polaris C8, Super Polaris C8; Meade GEM mounted 2080, LXD55 SC-8, LXD75 SC-8; Other older 8" SCT Optical Tube Assemblies

The case includes die-cut foam lining with compartments for the telescope optical tube assembly (OTA), diagonal (must be removed from the scope), eyepieces and accessories.  The finder scope must be detached and carried separately.  The case can be secured by placing a padlock around the two halves of the 7/8" diameter handle.

Outside dimensions of the case are approximately 23" x 16-3/4" x 10" and its empty weight is approximately 7.1 lbs.  The shipping box is approximately 23-1/8" x 10-1/8" x 17" and the shipping weight is approximately 9.5 lbs.  All values are subject to slight changes.  This case is 1" oversize for airline carryon.

See the Case Comparison Chart.

NOTE	This carrying case is designed for most 8" SCT Optical Tube Assemblies (OTAs), holding the telescope as securely as possible.  The foam design includes a pull-out section to accommodate mounting brackets and some variation in optical tube diameter.  The following information is provided to help you make a decision about using the case for telescopes not listed above:
	Carrying Case Closed
	Carrying Case Open with LXD55 SC-8 Inside

Telescope Carrying Case for Refractors

Celestron C6-R, C6-RGT, CR-150; Meade 127ED, LXD55 AR-5 / AR-6, LXD75 AR-5 / AR-6; Synta Sky-Watcher 15012EQ5

The case includes two lockable latches, three steel-reinforced handles, a 3" by 48" steel hinge and die-cut foam lining with compartments for telescope, finder scope, eyepieces and accessories.  For the Celestron scopes the diagonal must be detached and inserted in a specially designed space in the case.  The Meade diagonal may be left on.

Outside dimensions of the case are approximately 54-1/4" x 15" x 12" and its empty weight is approximately 25.6 lbs.  The shipping box is approximately 15-7/8" x 12-3/4" x 55-1/2" (FedEx Ground dimensional weight is 61 lb) and the shipping weight is approximately 30.8 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

NOTE	In the picture below, the telescope profile is of an AR-5.  Note that the diagonal is left in the scope and the focuser is racked out to fill the space. Our carrying cases are manufactured with exact-fit die-cut foam to hold the telescope as securely as possible.  They can, however, be used for telescopes other than those for which they were designed.  The following information is provided to help you make a decision about purchasing a case for telescopes not listed above: Select for Larger Image Inside Dimensions A = 49-1/2 (50" with pullout) B = 8-1/4" C = 6-1/2" D = 10" E = 9" F = 6-3/4" G = 9-1/4" H = 17" I = 17" J= 15-1/4" This case should hold 6" f/8 and 5" f/9 refractors fairly securely and smaller scopes with a little extra space.  The following refractor telescopes should fit inside the CASEREFR with some extra space. Orion 120
	Carrying Case Closed
	Carrying Case Open with LXD55 AR-6 Inside
	Carrying Case Open with Celestron CR-150 Inside

Carrying Case for Celestron CG-5 Equatorial Head

Celestron CG-5 Equatorial Mount (without GoTo), CG-5 GT Equatorial Mount (with computerized GoTo, including Advanced Series C5-S / C5-SGT / C6-R / C6-RGT / C8-N / C8-NGT / C8-S / C8-SGT / C9¼-S / C9¼-SGT / C10-N / C10-NGT and more...); Meade LXD55 Mount (LXD55-Series AR-5 / AR-6 / SC-8 / SN-6 / SN-8 / SN-10), LXD75 Mount (LXD75-Series AR-5 / AR-6 / SC-8 / SN-6 / SN-8 / SN-10)

The Equatorial Head case includes brackets for securing the complete head assembly and declination shaft.  A pouch for the hand control is included.

Outside dimensions of the Equatorial Head case are approximately 26-1/4" x 16-1/2" x 7-1/4" and its empty weight is approximately 9.7 lbs.  The shipping box is approximately 29-1/4" x 17-1/4" x 9-1/2" and the shipping weight is approximately 12.1 lbs.  All values are subject to slight changes.

See the Case Comparison Chart.

Soft Carrying Case for Tripod Mounts and Small Telescopes

Meade Standard Field Tripod; Vixen Porta Mount; Other Tripod Mounts and Telescopes with maximum dimensions of 38" x 10"

The durable padded soft case is designed for carrying a tripod mount or telescope.  Its cylindrical shape will hold equipment up to a maximum length of 38" and diameter of 10".  It includes a padded shoulder strap, handle grip and two zippered compartments for carrying small accessories.

See the Case Comparison Chart.

NOTE	Our soft carrying case was manufactured to fit the Meade Standard Field Tripod.  It can, however, be used for many telescopes and tripod mounts.  As we run across information about different equipment that will fit in the CASE3810C, we will update the following list: Meade 102ED (4"),  6600, LXD55 SN-6*, LXD75 SN-6*; Takahashi EM-10 Wooden Tripod Mount * The finder scope can be placed in the side pocket.
	Carrying Case Open
	The soft carrying case if for tripod mounts and small telescopes with a maximum length of 38" and a maximum diameter of 10", including the Meade Standard Field Tripod.

Counterweight Caddy for German Equatorial Counterweights

Celestron German Equatorial mounts; Meade German Equatorial mounts; Orion German Equatorial mounts

The Counterweight Caddy simplifies transportation of one to three counterweights (up to 6-1/4" diameter) included with most German Equatorial mounts by containing them in a steel support with a carrying handle.  (Three replacement thumbscrews are included for the Meade LXD55 / LXD75 counterweights because the original locking thumbscrews tend to break easily.)

See the Case Comparison Chart.

Counterweight Caddy, Empty and Full

Large-Wheel Upgrade for Telescope Carrying Cases

JMI Carrying Case models (Celestron) CASE14OTA (at time of purchase only), CASENEX8S, CASENEX8D, CASENEX11; (JMI) CASERB66; (Meade) CASELX8, CASELX208G, CASELX210G, CASELX10, CASELX212G (old style with small wheels), CASE55OTA

Add large 10" all-terrain pneumatic wheels to your telescope carrying case to improve travel over rough surfaces.  The upgrade can be purchased at the time you purchase the case or at a later date.  You will be required to drill six holes in the case if you are attaching an after-purchase upgrade.

The wheels can quickly and easily be removed from the axels on the bracket by pulling two spring clip pins.  This will help reduce the overall size of the case for placing it in a small space such as a trunk.  The whole assembly (wheels and bracket) can be removed in order to use the smaller standard wheels (on the 8" through 11" telescope cases).

When installed, the wheels add 2" of depth, measuring from the bottom of the case (not including the small standard wheels), and 10-1/2" to 11-1/2" of length, measuring from the end of the case where the bracket is attached.  If the wheels are removed from the bracket, the above dimensions can be reduced by approximately 4-1/2" each.  Due to the contoured shape of the carrying cases, actual changes in the overall length of the case will be less and will depend on the model.

Shipping weight is approximately 13.8 lbs.

NOTE	Some of our old cases, for the Celestron NexStar 11 and Meade LX200 10" telescopes, used metal brackets for mounting the integral wheels.  A modified bracket may be necessary, at no charge, to accommodate the shape of these older cases.  Call for details.
	Each wheel is quickly and easily removed from the mounting bracket by pulling the spring clip type pin (technically a hair pin cotter pin or hitch pin cotter pin).
	This picture shows all the hardware which comes with the Large Wheel Upgrade.

Retractable-Handle Upgrade for Telescope Carrying Cases

JMI Carrying Case models (Celestron) CASENEX11; (JMI) CASERB66 (at time of purchase only); (Meade) CASELX210G, CASELX10, CASELX212G (old style, current model includes retractable handles)

Add two wheelbarrow-style handle bars to increase maneuverability.  The handles fold in next to the base of the case to reduce the space necessary for storage and transportation.  The upgrade can be purchased at the time you purchase the case or at a later date.  The after-purchase installation is easy.  It requires a drill with a 1/4" bit for drilling eight mounting holes and appropriate wrenches (two crescent wrenches or two 7/16" and two 9/16" wrenches) for mounting the hardware on the case.

Shipping weight is approximately 6.2 lbs.

Includes Handlebars and Mounting Hardware